SANTEST_GYCRP位移传感器_GYCRS位移传感器:SANTEST-GYSE-A 线性位移传感器

更新时间：2026-04-30 17:15:10

SANTEST_GYCRP位移传感器_GYCRS位移传感器

访问量：411
型号：GYCRP/GYCRS
品牌：SANTEST
SANTEST_GYCRP位移传感器_GYCRS位移传感器SANTEST_GYCRP-Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd
GYCRP/GYCRS是日本SANTEST公司生产的线性位移传感器，传感器行程：15mm~5200mm，高精度，高品质
GYcRS and GYcRP probe uses RS-422 differential line drivers
signal transmission of which advantage is the noise free transmission
with a simple interface.
In combination with GYDC-05 controller, GYcRS probe has
achieved high resolution of 1μｍ.
GYcRP probe is available for high temperature ambient (200°C) and
SRT (Shock Resistant Technology) options.
Specifications
Non-linearity < ±0.025%FS TYP
Resolution (anaoglue) (digital) 16bit (with GYHC) / Min.1μm (with DC05)
Repeatability < ±0.01%FS
Temp drift < ±20ppmFS/°C
Admissible press. 35MPa (probe rod)
Operating Temp -20°C-+80°C
Storage Temp -40°C-+80°C
Vibration 6G (40Hz2mmPP)
Shock 100G (2msec)
Protection IP65
Cable length 1.5m (Standard) (Option Max.200m)
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Resolution depends on the controller combined.
Model No.

(1):Effective stroke
15mm-5200mm
(2):Thread
M:M24xP1.0 (Std)
N:M18xP1.5
U:3/4-16UNF
(3):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14:Φ13.8
(4):Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
Combined controller
Analogue output type:GYHC, GYFC2
Digital output type:GYDC-05
With LED Display:GKS-01 (only GYcRS)
Dimensions

Material probe head:Al diecast, probe rod:SS304
(GYcRP probe) Standard magnet:No.2P Other magnets are available from Magnet Grouping [B].
(GYcRS probe) Standard magnet:No.2PN Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Connector:Sanwa SNW-1607-PCF (Material:zinc alloy fluoroplastic)
In case of using probe only,
probe outputs digital signals (start/stop) using RS422 differential
line drivers. In response to user's interrogation (start) pulse, probe
provides stop pulse.
SANTEST-GYSE-A 线性位移传感器数显电子拉力机，橡胶拉力机，金属拉力机 SANTEST日本SANTEST代理SANTEST-GYCAT4.GYKM-LT位移传感器_GYKM-LS位移传感器进口三洋超低温冰箱MDF-U73V低温冰箱供应Agilent N1921A功率探头

SANTEST-GYSE-A 线性位移传感器

型号：SANTEST-GYSE-A
品牌：SANTEST
SANTEST-GYSE-A Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd.GYSE-A线性位移传感器GYSE-A是日本SANTEST公司生产的线性位移传感器，传感器行程：15mm~3000mm，高精度，高品质，

The GYSE-probe is an all-in-one type sensor with positional
resolution up to 1μm.
Positon output is Analogue, SSI, or Incremental.
Velocity output (option) is avaiable for Analogue type.
The positonal difference between 2 magnets can be observable
as well.
This allows quick and easy sensor cartrige replacement.
Sensor parameters (zero, full-scale or range) can be adjusted by
using the Windows programming software (ISO9141).
Specifications
Non-linearity < ±0.025%FS (Min.±50μm)
Resolution 16bit (1/65536)
Repeatability ±0.001%FS (Min.±3μm)
Temp drift ±20ppmFS/°C
Output Analogue
Position output (Standard) 0-10V
(output current:Max.5mA, load:Min.2kΩ)
Or 4-20mA (load:Min.500Ω)
Velocity output (Option) ±10V or 4-20mA / Resolution:16bit (1/65536)
Alarm output Open drain　50V　0.1A　(Alarm signal for lost magnet)
Power supply +24 (±2) VDC (80mA)
Frequency response Std 1kHz (depending on stroke) sampling
Admissible press. 35MPa (probe rod)
Operating Temp -20°C-+80°C
Storage Temp -40°C-+80°C
Vibration 15G (10-2000Hz)
Shock 100G (2msec)
Protection IP67 (Connecting mount or Pigtail type)
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Model No.

(1):Effective stroke
15mm-5200mm
(2):Thread
M:M24xP1.0 (Standard)
N:M18xP1.5
U:3/4-16UNF-3A
(3):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14Φ13.8
(4)Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
For CN type, only counter connector supplied.
In case extra cable needed, specify the length.
(5):Analogue position output (OUT1)
AD 0-10V (Standard)
AR 10-0V
BD 4-20mA
BR 20-4mA
CD or CR□□
bipolar output
[ex]
CD10
CR05 □□V-□□V

-10V-+10V
+5V--5V
V Z/F
[ex]
V1/5
V9.5/0.5 Custom order
1-5V
9.5-0.5V
I Z/F
[ex]
I5.12/20
I20/5.38 Custom order
5.12-20mA
20-5.38mA
*Z=Zero positon
*F=Full scale position
(6):Option:Analogue output (OUT2)
Position:see (5)
Velocity output (Note)
VA[ ]　±10V
WB[ ]　4-20mA
[ ]:max velocity (1.00-999mm/sec)
(ex.9R99:max velocity＝9.99mm/sec)
N:No option
(Note)
VA:when magnet stops, output is 0V. when moving toward probe tip, +10V
WB:when magnet stops, output is 4mA. when moving in any direction, 20mA.
Dimensions

Material probe head:Al diecast, probe rod:SS304
Standard magnet:No.2Y.
Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Connector:LEMO connector (Material:brass with Ni plating)
(Standard:straight type, Option:L type)