SANTEST-GYSE-A 线性位移传感器:数显电子拉力机，橡胶拉力机，金属拉力机

更新时间：2026-04-30 18:29:54

SANTEST-GYSE-A 线性位移传感器

访问量：494
型号：SANTEST-GYSE-A
品牌：SANTEST
SANTEST-GYSE-A Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd.GYSE-A线性位移传感器GYSE-A是日本SANTEST公司生产的线性位移传感器，传感器行程：15mm~3000mm，高精度，高品质，

The GYSE-probe is an all-in-one type sensor with positional
resolution up to 1μm.
Positon output is Analogue, SSI, or Incremental.
Velocity output (option) is avaiable for Analogue type.
The positonal difference between 2 magnets can be observable
as well.
This allows quick and easy sensor cartrige replacement.
Sensor parameters (zero, full-scale or range) can be adjusted by
using the Windows programming software (ISO9141).
Specifications
Non-linearity < ±0.025%FS (Min.±50μm)
Resolution 16bit (1/65536)
Repeatability ±0.001%FS (Min.±3μm)
Temp drift ±20ppmFS/°C
Output Analogue
Position output (Standard) 0-10V
(output current:Max.5mA, load:Min.2kΩ)
Or 4-20mA (load:Min.500Ω)
Velocity output (Option) ±10V or 4-20mA / Resolution:16bit (1/65536)
Alarm output Open drain　50V　0.1A　(Alarm signal for lost magnet)
Power supply +24 (±2) VDC (80mA)
Frequency response Std 1kHz (depending on stroke) sampling
Admissible press. 35MPa (probe rod)
Operating Temp -20°C-+80°C
Storage Temp -40°C-+80°C
Vibration 15G (10-2000Hz)
Shock 100G (2msec)
Protection IP67 (Connecting mount or Pigtail type)
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Model No.

(1):Effective stroke
15mm-5200mm
(2):Thread
M:M24xP1.0 (Standard)
N:M18xP1.5
U:3/4-16UNF-3A
(3):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14Φ13.8
(4)Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
For CN type, only counter connector supplied.
In case extra cable needed, specify the length.
(5):Analogue position output (OUT1)
AD 0-10V (Standard)
AR 10-0V
BD 4-20mA
BR 20-4mA
CD or CR□□
bipolar output
[ex]
CD10
CR05 □□V-□□V

-10V-+10V
+5V--5V
V Z/F
[ex]
V1/5
V9.5/0.5 Custom order
1-5V
9.5-0.5V
I Z/F
[ex]
I5.12/20
I20/5.38 Custom order
5.12-20mA
20-5.38mA
*Z=Zero positon
*F=Full scale position
(6):Option:Analogue output (OUT2)
Position:see (5)
Velocity output (Note)
VA[ ]　±10V
WB[ ]　4-20mA
[ ]:max velocity (1.00-999mm/sec)
(ex.9R99:max velocity＝9.99mm/sec)
N:No option
(Note)
VA:when magnet stops, output is 0V. when moving toward probe tip, +10V
WB:when magnet stops, output is 4mA. when moving in any direction, 20mA.
Dimensions

Material probe head:Al diecast, probe rod:SS304
Standard magnet:No.2Y.
Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Connector:LEMO connector (Material:brass with Ni plating)
(Standard:straight type, Option:L type)
数显电子拉力机，橡胶拉力机，金属拉力机SANTEST日本SANTEST代理SANTEST-GYCAT4. GYKM-LT位移传感器_GYKM-LS位移传感器进口三洋超低温冰箱MDF-U73V低温冰箱供应Agilent N1921A功率探头长期供应Agilent N1922A功率探头

数显电子拉力机，橡胶拉力机，金属拉力机

型号：CL-1000N
品牌：昌隆
数显拉力机
一、概述
CL系列数显电子拉力机是一款先进、实用的仪器。广泛适用于橡胶、塑料、帆布、帘线、钢丝、铜材、管材、电线、电缆等金属和非金属材料的拉伸、压缩、剥离、撕裂、粘合力等力学性能试验。变频无级调速，自动保留最大力值及定伸力值。

二、技术指标
1、执行标准：GB/T16491-2008
2、分辨精度：0.01～0.1N
3、系统精度：小于0.1％
4、显示范围：0～99999.9N
5、拉伸速度范围：0～500mm/min（特殊要求另定）
6、活动夹持器最大行程：800mm
7、功耗：小于15W（数显表）整机功率≤800W
8、电源电压：～220V±10％
9、外形尺寸：540*500*1400
10、重量：100KG

三、特点
1、自动清零：试验之前，自动清零
2、自动变速：试验过程中试验速度可按预先的速度运行，也可根据需要任意改变速度。
3、示值校验：系统可实现力值的准确标定。
4、显示方法：液晶显示器，力值数据直接显示，伸长值自动显示
5、限位保护：具有自动限位保护功能。
6、一机多用：配备不同的传感器，可实现一机多用。