 |
产品型号： | 二级安全光栅 |
| 产品品牌： | 劳易测 | |
| 产品价格： | 面议 | |
| 所 在 地： | 上海 闸北区 | |
| 发布日期： | 2015-01-21 | |
 |
||
详细说明
SOLID-2/SOLID-2E
Safety Light Curtains
产品资料下载
SOLID-2/SOLID-2E安全光幕系统
PDF阅读器：官方下载
下载提示：
1、产品详细资料为PDF文档；
2、下载后若不能打开文档，请先安装PDF阅读器；
3、下载时推荐使用下载工具或目标另存为。
SOLID-2 / SOLID-2E - Safety Light Curtains
TüV NRTL US TüV CSA US CE IP 65
Point of operation guarding: Light Curtain with finger resolution Point of operation guarding: Light Curtain with hand resolution Danger zone guarding: Light Curtain Access guarding: Light Curtain
A reliable and interference-proof safety sensor system is a prerequisite for high system availability and achievement of production targets. At the same time the increasing costs pressure of global competition also requires an economical safety system.
Satisfying these central requirements was the maxim with the development of the SOLID-2 type 2 Safety Light Curtains with integrated cyclical testing. These devices are characterized by their robust housing design and high interference immunity.
Various resolutions and functionalities enable cost-optimized solutions with the most varied applications. SOLID-2 is predestined for hand and arm protection and for detecting the presence of people.
Special features
Type 2 self-testing Safety Light Curtain in accordance with IEC/EN 61496
SIL 2 Safety Light Curtain in accordance with IEC/EN 61508
Slender and robust aluminum housing (30 mm x 34 mm)
Fault-free operation of adjacent devices with selection of different transmission channels
Easy function selection with external wiring
Important technical data, overview
Type in accordance with IEC/EN 61496 Type 2
SIL in accordance with IEC 61508 and IEC/EN 62061 SIL 2
Performance Level (PL) in accordance with EN ISO 13849-1 PL d
Category in accordance with EN ISO 13849 and EN 954-1 2
Resolution 20 mm 30 mm 40 mm 90 mm
Range 0.5...15 m 0.2...10 m 0.8...20 m 0.8...20 m
Protective field height (type-dependent) 150...1800 mm
Profile cross-section 30 mm x 34 mm
Safety-related switching outputs (OSSDs) 2 pnp transistor outputs
Connection system M12 plug
Functions SOLID-2 SOLID-2E
Integrated cyclical testing
Automatic start/restart
Start/restart interlock (RES), selectable
Dynamic contactor monitoring (EDM), selectable
2 transmission channels, selectable
Function extension
SOLID-2
With Safety Interface Relay output RES EDM Muting Cycle-control
MSI-SR4
MSI-m *)
MSI-i *)
MSI-mi *)
SOLID-2E
MSI-RM2 **) **)
*) Can also be connected to SOLID-2E **) Already included in the device