SANTEST_GYCRP位移传感器_GYCRS位移传感器SANTEST_GYCRP-Shanghai Hangou Mechanical And Electrical Equipment Co。，Ltd
GYCRP/GYCRS是日本SANTEST公司生产的线性位移传感器，传感器行程：15mm~5200mm，高精度，高品质
GYcRS and GYcRP probe uses RS-422 differential line drivers
signal transmission of which advantage is the noise free transmission
with a simple interface.
In combination with GYDC-05 controller, GYcRS probe has
achieved high resolution of 1μｍ.
GYcRP probe is available for high temperature ambient (200°C) and
SRT (Shock Resistant Technology) options.
Specifications
Non-linearity < ±0.025%FS TYP
Resolution (anaoglue) (digital) 16bit (with GYHC) / Min.1μm (with DC05)
Repeatability < ±0.01%FS
Temp drift < ±20ppmFS/°C
Admissible press. 35MPa (probe rod)
Operating Temp -20°C-+80°C
Storage Temp -40°C-+80°C
Vibration 6G (40Hz2mmPP)
Shock 100G (2msec)
Protection IP65
Cable length 1.5m (Standard) (Option Max.200m)
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Resolution depends on the controller combined.
Model No.
(1):Effective stroke
15mm-5200mm
(2):Thread
M:M24xP1.0 (Std)
N:M18xP1.5
U:3/4-16UNF
(3):Sensor rod diameter
blank:Φ10 (Standard)
8:Φ8
14:Φ13.8
(4):Cable connection
CN:Connector (Standard)
G*:Pigtail type
(*:Cable length [m], Standard:1.5m)
Combined controller
Analogue output type:GYHC, GYFC2
Digital output type:GYDC-05
With LED Display:GKS-01 (only GYcRS)
Dimensions
Material probe head:Al diecast, probe rod:SS304
(GYcRP probe) Standard magnet:No.2P Other magnets are available from Magnet Grouping [B].
(GYcRS probe) Standard magnet:No.2PN Other magnets are available from Magnet Grouping [GG].
The tip dead zone length (70mm) depends on the magnet or float type.
Connector:Sanwa SNW-1607-PCF (Material:zinc alloy fluoroplastic)
In case of using probe only,
probe outputs digital signals (start/stop) using RS422 differential
line drivers. In response to user's interrogation (start) pulse, probe
provides stop pulse.
|
