ZKRQ系列电动O形三通球阀:电动衬氟O型球阀

更新时间：2025-11-24 21:30:54

ZKRQ系列电动O形三通球阀

访问量：330
型号：
品牌：
一、产品概述Product Overview：

ZKRQR系列电动O形三通球阀由电动执行机构和三通球阀组成。改变球芯与管道的相对位置，可以对三条管路流体实现不同的组合控制。该产品以220V单相交流电为力源，接受控制系统 (或操作器) 来的 220V开关信号，并通过单相电源切换驱动可逆单相齿轮减速电机，按规定的组合要求，使球阀实现对管路流体的换向作用。 T型三通可使三路正交的管道互相连通，即起分流(合流)作用，也可使其中两条管道连通而切断另一路管道。 L型三通流路只能连通互相正交的两条管道或切换方向。

ZKRQR O-way ball valve series by the electric actuator and ball valve components. Change the ball core and the relative position of the pipeline, the pipeline fluid can be achieved for three different combinations of control. The products are 220V single-phase AC electricity for power sources, to accept the control system (or operator) to the 220V switch signal, and drive through the single-phase power switching single-phase reversible gear motor, the required combination of requirements, so that valve to achieve piping for the fluid to the role. Three three-way T-orthogonal channels can connect with each other, that divert traffic (merging) effect, which can also cut off the two tubes connected to another road and pipeline. L-shaped flow path links the two can only be connected to each other orthogonal channels or switch direction.

二、阀门特性Valve characteristics：

公称压力：PN1.0、1.6、2.5、4.0Mpa、ANSI150、300
公称通径：DN20～300mm
工作温度：硬密封：-40～300℃ 软密封：-40～180℃
工作电压：220V、380V
阀座形式：不锈钢可动硬密封、PTFE软密封。
主要材质：阀体 (1)WCB (2)304 (3)316 (4)316L
阀芯 (1)304 (2)316 (3)316L
流体范围：空气、水、气体、石油和石化产品、腐蚀性介质
表面处理: 抛光]

电动衬氟O型球阀不锈钢三片式电动球阀电动塑料球阀不锈钢电动球阀电动超薄型球阀MGPM63N-175

电动衬氟O型球阀

型号：
品牌：
DHRF系列电动衬氟O型球阀是旋转切断型球阀它由ARSOTA阿斯塔智能型电动执行机构和衬氟塑球阀两部分组成。由于该阀内腔及球体均采用高压注塑工艺，衬有耐腐蚀、耐老化的氟塑料FEP(简称F46)或PTFE(简称F4)，故具有可靠的耐腐蚀性和密封性。能广泛适用于化工、石油、冶金、医药、电力等工业部门，实现对生产过程中酸、碱等强腐蚀介质的调节或切断。

DHRF O-series electric fluorine spin cut-off valve is a valve which consists of ARSOTA Astana intelligent electric valve actuators and fluorine plastic composed of two parts. As the valve cavity and the sphere are using high-pressure injection molding process, lined with corrosion-resistant, anti-aging fluorine plastic FEP (referred to as F46) or PTFE (referred to as F4), it has the corrosion resistance and reliable sealing. Can be widely used in chemical, petroleum, metallurgy, medicine, electricity and other industrial sectors, to achieve the production process, acid, alkali and other strong corrosive media regulation, or cut off.

--------------------------------------------------------------------------------

一.特点Feature：
1.耐腐蚀：阀体内腔及球体均包衬2.5～3㎜厚的F46或F4，能耐酸、碱、耐强腐蚀。
2.采用软密封阀座，密封性能好。
3.体积小，重量轻，结构简单，安装维修方便。
4.流阻小，流通能力大。
5.如配用阀门定位器，可实现比例调节。
6.该阀可配各种型号的电动执行机构，配套成ZDRF－10/16C型电动衬氟塑O型球阀。

1 Corrosion resistance: the body cavity and the sphere are lining package ~ 3 mm thick, 2.5 F46 or F4, to acid, alkali, strong corrosion resistance.
2 soft sealed valve seat, sealing performance.
3 small size, light weight, simple structure, convenient installation and maintenance.
4 small flow resistance, flow capacity.
5 equipped with a valve positioner, such as, the proportion of adjustment can be achieved.
6 The valve can be equipped with various types of electric actuators, electric facilities into ZDRF-10/16C fluorine plastic O-ball.